TL-25M8190Z_F08_251209.x_-1203Dec20.htm

Job Sheet-25M8190Z_F08_251209.x_

Path : D:\sejong\model\2025\25m8190z\08\08-01\

Geometry : 25M8190Z_F08_251209.x_t.wnc

P/G : M041203Dec20.htm


X_Min : -325.000, X_Set_A : -330.000	Y_Max : 195.000, Y_Set_A : 200.000	Z_Max : 30.000
X_Max : 325.000, X_Set_A : 330.000	Y_Min : -195.000, Y_Set_A : -200.000	Z_Min : 0.000
X_Center : 0.000	Y_Center : 0.000
X_Length 650.00	Y_Length 390.00	Z_Length 30.00

images/basepart.png

..

===> :Z_Min = 0.00,,,,,,,,,,Z_Min: : 0.00

	No.						Krpm	Feed Rate	Approach Rate	Z-Step	Angle A,B,C
1	7, 8	1	Bull-nose D 32.60 r 4.00	32.60	4.00	$images\outil7.tool.png$	1.5	3000	3000	0.50
2	9	2	Bull-nose D 20.80 r 2.00	20.80	2.00	$images\outil9.tool.png$	2.3	3000	3000	0.30
3	10, 11	3	Bull-nose D 16.80 r 2.00	16.80	2.00	$images\outil10.tool.png$	2.6	2500	2500	0.25
4	12, 13, 14	4	Bull-nose D 9.80 r 1.00	9.80	1.00	$images\outil12.tool.png$	5.5	2300	2500	0.20
5	15	5	Bull-nose D 6.00 r 0.20	6.00	0.20	$images\outil15.tool.png$	6.5	2200	2200	0.08
5	17, 18	5	Bull-nose D 6.00 r 0.20	6.00	0.20	$images\outil17.tool.png$	6.5	2200	2200	0.12
6	16	6	Bull-nose D 8.00 r 1.00	8.00	1.00	$images\outil16.tool.png$	6.0	2200	2200	0.15
WorkNC Tool List: 1, 2, 3, 4, 5, 6