JS-25M8190Z_F08_25120Dec20.htm

Job Sheet-25M8190Z_F08_251209.x_

Path : D:\sejong\model\2025\25m8190z\08\08-01\

Geometry : 25M8190Z_F08_251209.x_t.wnc

P/G : M041203Dec20.htm


X_Min : -325.000, X_Set_A : -330.000	Y_Max : 195.000, Y_Set_A : 200.000	Z_Max : 30.000
X_Max : 325.000, X_Set_A : 330.000	Y_Min : -195.000, Y_Set_A : -200.000	Z_Min : 0.000
X_Center : 0.000	Y_Center : 0.000
X_Length 650.00	Y_Length 390.00	Z_Length 30.00

images/basepart.png

..

===> :Z_Min = 0.00,,,,,,,,,,Z_Min: : 0.00

---MC1203-25M8190Z_F08_251209.x_Dec20.jpg---- , Programmer's Comment : 塵匸

NCD	Toolpath Type							Zmin (R_cen)	Stock	Krpm	Time
-
O3407	Global Rough/Rerough	1		32.60	4.00	A02-BT50_C42-135-SRS	36.00	-5.00	0.00	1.5	00:13
O3408	Global Rough/Rerough	1		32.60	4.00	A02-BT50_C42-135-SRS	36.00	-5.00	0.00	1.5	00:27
O3409	Global Rough/Rerough	2		20.80	2.00	R:2.00 , A03-BT50_C32-135-SRS	34.00	-3.00	0.00	2.3	00:28
O3410	Z-Level Remachining	3		16.80	2.00	R:2.00 , A03-BT50_C32-135-SRS	32.00	-0.90	0.00	2.6	00:29
O3411	Global Rough/Rerough	3		16.80	2.00	R:2.00 , A03-BT50_C32-135-SRS	34.00	-3.00	0.00	2.6	00:28
O3412	Global Rough/Rerough	4		9.80	1.00	R:1.00 , B02-BT50_HF10_225N-SRS	33.00	-2.00	0.00	5.5	00:35
O3413	Z-Level Finishing	4		9.80	1.00	R:1.00 , B02-BT50_HF10_225N-SRS	33.00	-2.00	0.00	5.5	00:56
O3414	Global Rough/Rerough	4		9.80	1.00	R:1.00 , B02-BT50_HF10_225N-SRS	33.00	-2.00	0.00	5.5	00:33
O3415	Z-Level Finishing	5		6.00	0.20	R:0.20 , B02-BT50_HF06_225N-SRS	31.10	-1.00	0.00	6.5	00:43
O3416	Global Rough/Rerough	6		8.00	1.00	R:1.00 , B02-BT50_HF08_225N-SRS	33.30	-2.00	0.30	6.0	00:39
O3417	Z-Level Finishing	5		6.00	0.20	R:0.20 , B02-BT50_HF06_225N-SRS	32.10	-1.00	0.10	6.5	00:46
O3418	Z-Level Finishing	5		6.00	0.20	R:0.20 , B02-BT50_HF06_225N-SRS	32.00	-0.98	0.00	6.5	00:46

7 8 9 10 11 12 13 14 15 16 17 18, Selected : 1100559.25mm

Total Time : 07:13

(Each-PP) : 55_G155 ﹢﹢ [ S1250-#3 ] ﹢﹢ , Saved File Name : M04120318Dec20.htm, Save time : 16:45:29 , Saved Counter : 18