JS-26M1170Z_F01-S.wncApr04.htm

Job Sheet-26M1170Z_F01-S.wnc

Path : D:\sejong\model\2026\26M1170Z\01\01-1\

Geometry : 26M1170Z_F01_260326.x_t.wnc

P/G : M041203Apr04.htm


X_Min : -230.000, X_Set_A : -235.000	Y_Max : 290.000, Y_Set_A : 295.000	Z_Max : 0.000
X_Max : 230.000, X_Set_A : 235.000	Y_Min : -290.000, Y_Set_A : -295.000	Z_Min : -50.000
X_Center : 0.000	Y_Center : 0.000
X_Length 460.00	Y_Length 580.00	Z_Length 50.00

images/basepart.png

..

---|Warning---Z_Max: : 0.00 ---
---|Warning---Z_Min : : -50.00 ---

---MC1203-26M1170Z_F01-S.wnc Apr04.jpg---- , Programmer's Comment : 塵匸

NCD	Toolpath Type							Zmin (R_cen)	Stock	Krpm	Time
D2 0.2R : 7.80mm
O2724	Z-Level Finishing	15		2.00	0.20	R:0.20 , B02-BT50_HF04_225N-DBM-DUMMY	11.10	-45.70	0.30	7.9	00:07
O2725	Z-Level Finishing	15		2.00	0.20	R:0.20 , B02-BT50_HF04_225N-DBM-DUMMY	11.10	-45.90	0.10	7.9	00:06
O2726	Z-Level Finishing	15		2.00	0.20	R:0.20 , B02-BT50_HF04_225N-DBM-DUMMY	11.10	-45.98	0.02	7.9	00:07
M6 TAP
	Manual Hole Machining			25.98	1.00	R:1.00 ,			0.00	3.1
	Centering	24		10.00		R:0.00 , T02-BT50_Slim-Chuck-155-DBM-DUMMY	37.80	-36.80	0.00	1.6	00:00
	Drilling	25		5.20		R:0.00 , T01-BT50_Drill-Chuck-130-DBM-DUMMY	53.40	-52.36	0.00	0.8	00:06
	Tapping	22		6.00		R:0.00 , T03-BT50_Tap-Chuck-DBM-DUMMY	51.00	-50.00	0.00	0.1	00:02

24 25 26 30 30.1 30.2 30.3, Selected : 4621.50mm

Total Time : 00:21

(Each-PP) : 55_G155 ﹤﹤﹤﹤ [ DBM-2030 ] ﹤﹤﹤﹤﹤ , Saved File Name : M04120337Apr04.htm, Save time : 11:25:27 , Saved Counter : 37

Concatenated Postprocessor
No.	CC_NCD	Postprocessor	Toolpath List:	Length: Total	Time: Total
3	O0703	55_G155==[ Drill / Tap ]==	30.1 30.2 30.3	723.70	00:00