JS-25M8220Z_31.wnc Dec20.htm

Job Sheet-25M8220Z_31.wnc

Path : D:\SEJONG\MODEL\2025\A-TECH\25m8220z\04\04-1\

Geometry : 25M8220Z_F04_REV1_251211.stp.wnc

P/G : M031202Dec20.htm


X_Min : -357.500, X_Set_A : -362.500	Y_Max : 340.000, Y_Set_A : 345.000	Z_Max : 175.000
X_Max : 357.500, X_Set_A : 362.500	Y_Min : -340.000, Y_Set_A : -345.000	Z_Min : 0.000
X_Center : 0.000	Y_Center : 0.000
X_Length 715.00	Y_Length 680.00	Z_Length 175.00

images/basepart.png

..

===> :Z_Min = 0.00,,,,,,,,,,Z_Min: : 0.00

---MC1202-25M8220Z_31.wnc Dec20.jpg---- , Programmer's Comment : 100H , 窍盔魄

NCD	Toolpath Type							Zmin (R_cen)	Stock	Krpm	Time
O6101	Tangent to Curve	9		21.00	1.00	R:1.00 , B03-BT50_HF20-165H-SRS	21.00	155.00	0.00	3.6	00:29
O6102	Global Rough/Rerough	1		63.00	4.00	A01-BT50-HEAD-SRS	93.20	61.00	0.70	0.8	03:27

O6103	Global Rough/Rerough	2		33.00	4.00	A02-BT50_C42-135-SRS	95.80	61.13	0.70	1.5	01:37
O6104	Global Rough/Rerough	3		17.00	2.00	R:2.00 , A03-BT50_C32-135-SRS	75.00	74.70	0.70	2.6	02:41
O6105	Global Rough/Rerough	4		17.00	2.00	R:2.00 , A03-BT50_C32-135-SRS	75.00	59.70	0.70	2.6	01:38
O6106	Z-Level Finishing	5		33.00	0.80	R:0.80 , A02-BT50_C42-135-SRS	95.60	60.20	0.20	1.7	03:08
O6107	Flat Surface Finishing	5		33.00	0.80	R:0.80 , A02-BT50_C42-135-SRS	95.50	60.20	(W) 0.30 (E) 0.20	1.7	00:13
O6108	Z-Level Remachining	6		17.00	0.80	R:0.80 , A03-BT50_C32-165-SRS	75.00	59.50	0.25	3.4	02:58
O6109	Z-Level Remachining	7		10.00	1.00	R:1.00 , B02-BT50_SSF10S_225N-SRS	45.00	59.55	0.35	5.5	01:17
O6110	Z-Level Remachining	8		6.00	0.20	R:0.20 , B02-BT50_SSF06S_225N-SRS	30.00	48.72	0.35	6.5	02:18

1 2 3 4 5 6 7 8 9 10, Selected : 3237518.00mm

Total Time : 19:48

(Each-PP) : 54_G154 ≯≯ [ S1250-#2 ] ≯≯ , Saved File Name : M03120216Dec20.htm, Save time : 18:22:20 , Saved Counter : 16